Recommended layout to achieve MIL STD 461G P-Duke have now released the reference design showing how the new MCF Filter can be used in conjunction with their COTS DC/DC converters and meet the mil standards MIL-STD-1275D and MIL-STD-461G. With the addition of a few caps and MLCC, the MCF filter along with their [...]
P-DUKE has added the new TAD50 series to its open frame power supplies portfolio from 15W to 450W. It has a compact 3"x1.5" footprint and delivers 50W continuous output power. In addition, a peak power function is available that enables the power supply to deliver up to 140% of rated output power for 5 [...]
P-DUKE has launched the new MCF series which are front-end filters which are designed to complement P-DUKE COTS (commercial-off-the-shelf) DC/DC converters to enable them to comply with the requirements of MIL-STD 1275D (Characteristic of 28-volt DC electrical systems in military vehicles) and MIL-STD 461 (Requirement for the control of electromagnetic interference characteristics of subsystems [...]
P-DUKE has added a new 300W output power series, MAF300, to its medical grade AC/DC power supplies portfolio range from 15W to 450W. MAF300 is designed for dedicated medical applications with the highest insulation of 2xMOPP, in accordance with IEC 60601-1. It has a low leakage current of less than 100uA which makes it [...]
This White Paper was originally released by P-Duke in August 2022 Download PDF version What to look for in a DC/DC converter for Railway Applications Railway electrification systems rely on a steady DC supply to both power their DC motors and the control/energy circuits. These DC-traction systems are more [...]
This article was originally published by P-Duke on 5 May, read in full below or download a pdf version Download PDF Copy A new approach to power stage design for EN50155 compliance regarding supply interruption and change-over. An article by Antonio Hsieh, Field Application Engineer at P-DUKE This article discusses [...]
The RCD20U is a DC/DC converter series that provides high performance and high reliability for railway and industrial applications. It comes in a compact 1"x1" industrial standard package and delivers up to 20W output power. These converters feature an 8:1 or 12:1 ultra-wide input voltage range of 9-75VDC and 14-160VDC which simplify the design [...]
The RHM20W series are high performance 20W DC/DC converters with 3000VAC reinforced isolation and 4.5 mm clearance/ creeping distances for safety critical application. This next generation of board mountable DC/DC converters has been designed especially for the demanding, ruggedized railway and industrial applications. This 20W DC/DC converter series offer single and dual output models [...]
This white paper originally published by P-Duke on 17 February, read in full below or download a pdf version Download White Paper PDF The uses of DC-DC converters span across a wide range of industries, from aerospace and military applications to commercial and industrial spaces. Regardless of the circuit [...]
P-DUKE has announced the latest extension of its high-power density , ultra-compact medical power supply range. The new MAD180 series delivers 180 watts with forced air cooling and up to 150W with natural convection cooling. Additionally, up to 220W peak output power for 5 seconds is available. This series is featured with 2 X [...]