P-DUKE has launched the new MCF series which are front-end filters which are designed to complement P-DUKE COTS (commercial-off-the-shelf) DC/DC converters to enable them to comply with the requirements of MIL-STD 1275D (Characteristic of 28-volt DC electrical systems in military vehicles) and MIL-STD 461 (Requirement for the control of electromagnetic interference characteristics of subsystems [...]
This White Paper was originally released by P-Duke in August 2022 Download PDF version What to look for in a DC/DC converter for Railway Applications Railway electrification systems rely on a steady DC supply to both power their DC motors and the control/energy circuits. These DC-traction systems are more [...]
This article was originally published by P-Duke on 5 May, read in full below or download a pdf version Download PDF Copy A new approach to power stage design for EN50155 compliance regarding supply interruption and change-over. An article by Antonio Hsieh, Field Application Engineer at P-DUKE This article discusses [...]
The RCD20U is a DC/DC converter series that provides high performance and high reliability for railway and industrial applications. It comes in a compact 1"x1" industrial standard package and delivers up to 20W output power. These converters feature an 8:1 or 12:1 ultra-wide input voltage range of 9-75VDC and 14-160VDC which simplify the design [...]
The RHM20W series are high performance 20W DC/DC converters with 3000VAC reinforced isolation and 4.5 mm clearance/ creeping distances for safety critical application. This next generation of board mountable DC/DC converters has been designed especially for the demanding, ruggedized railway and industrial applications. This 20W DC/DC converter series offer single and dual output models [...]
This white paper originally published by P-Duke on 17 February, read in full below or download a pdf version Download White Paper PDF The uses of DC-DC converters span across a wide range of industries, from aerospace and military applications to commercial and industrial spaces. Regardless of the circuit [...]
The RCD30W series is a 30W high-performance DC/DC converter designed for ruggedized railway and industrial applications. It expands upon P-Duke’s railway converter range of 10W to 20W in their compact 1”x1” package. The series has 4:1 input voltage ranges of 9-36V, 18-75V, and 36-160V, which perfectly fits the supply voltages of rolling stock equipment. [...]
The MPQ60W series is a high-performance DC/DC converter designed for use in many medical and homecare applications, such as: laser treatment, electrosurgical systems, physiotherapy chairs, medical aesthetic, endoscopic devices, patient monitoring, drug delivery, defibrillation equipment among many others. Due to its low leakage current being less than 4.5μA, these DC/DC converters can also be [...]
The RHKW/RHDW series from P-Duke are high performance DC/DC converters with 3000VAC reinforced isolation with 4.5 mm clearance/ creeping distances for safety critical applications. This next generation of board mountable DC/DC converters has been designed especially for the demanding, ruggedized railway and other such industrial applications where harsh conditions are typical. The series consists [...]
Over the last few months, both Delta and P-Duke have increased their product range of rail specific products, all of which conform to the industry standard EN50155. All of these products have been specially designed to meet the harsh conditions found in the rail environment. With these including heat, frost, dust or vibration our [...]