100W Medical Power Supply – ML100 Series


100W Medical Power Supply – ML100 Series

The ML100 Series are a range of high efficiency ITE and Medical Grade switching power supplies which provide up to 92% efficiency. This unique design reduces energy consumption and generates less wasted heat. It requires little forced air cooling and decreases AC loads, resulting in greater economy of operation. Our state-of-the-art technology yields a very small 3” x 2” footprint, reduces wasted power, and is among the highest power densities available in the market. This design brings reduced energy costs, higher reliability and longer product life. The ML100 is available in 4 versions, open frame, U-Chassis, enclosed with fitted fan and Din Rail mount. All are available with 12V, 15V, 18V, 24V, 28V, 36V or 48V single outputs.


  • 100 W AC-DC
  • High-Efficiency–up to 92%
  • Low standby power consumption (< 0.3 W)
  • Wide input voltage range from 85 to 264 VAC
  • Also supports DC-DC input voltage from 120 to 370 VDC
  • Convection cooled up to full power (no fan needed)
  • Active power factor correction
  • Built-in EMI filter
  • Adjustable output voltage (±10%)
  • Open frame dimensions: 2.00″ × 3.00″ × 1.16″
  • 4,000 VAC input to output 2×MOPP insulation
  • Protection Class I and II
  • Low-leakage current (<75 µA)
  • Operating altitude up to 5,000 m
  • RoHS compliant
  • Three-year warranty

Model Information

Model NoInput VoltageOutput VoltageOutput CurrentOutput Power
MLx100-1285 to 264 V AC12V8.34A100W
MLx100-1585 to 264 V AC15V6.67A100W
MLx100-1885 to 264 V AC18V5.56A100W
MLx100-2485 to 264 V AC24V4.17A100W
MLx100-2885 to 264 V AC28V3.58A100W
MLx100-3685 to 264 V AC36V2.78A100W
MLx100-4885 to 264 V AC48V2.09A100W

Substitute “x” for “E” for Enclosed with Fan, “O” for Open Frame, “U” for U-Chassis and “D” for Din rail mounted



N2Power is a leading designer and manufacturer of high efficiency, ultra-small, power-dense power supplies. Our environmentally-friendly designs reduce energy consumption, generate less waste heat, and most models require little or no forced air cooling – yielding decreased AC loads and increased reliability and economy of operation. We offer numerous power solutions for a variety of products in the IT equipment, broadcast, industrial, kiosk, gaming, lighting and test equipment markets. They offer feature rich power supplies, with current sharing, built in or-ing diodes for N+1 redundancy, PM Bus communications, Active PFC plus a host of on-board protections including, Over Voltage, Over Power, Over Temperature and short circuit protection.

Download pdf document

[wpdm_category id="n2power" template="link-template-default-nl" cols=1]

ML100 Datasheet