P-Duke increase their range of EN50155 approved railway dc/dc converters with the RED40, 40W series.
This series is supplied in a compact industry standard 2” x 1” package with a 4:1 wide input range and is typically suitable for many on board applications.
There are a variety of single output versions, from 3.3V to 53v and dual output versions offering +/-12V, +/-15V, +/-24V. The output can be adjusted up to 10%, this is accomplished by connecting an external resistor between the trim pin and either the +Vout or -Vout pins, the data sheet details of the resistor required.
The RED40 series offer efficiencies up to 93% and feature complete protection functions, such as overcurrent protection, short-circuit protection, output overvoltage protection, overtemperature protection, etc.
They add to the wide offering from P-DUKE of their range of 3-300W rail approved DC to DC converters, all featuring high efficiencies, high operating temperature with built in EMI class A/B filters and high reliability.
- No Minimum Load Required
- 4:1 Wide Input Range: 9-36, 18-75, 36-160 VDC
- 3000VDC Input to Output Isolation For 110vin
- Industry-standard Package 2.00 X 1.00 X 0.40 Inch
- Six-Sided Continuous Shield
- UL62368-1, EN62368-1, & IEC62368-1 Safety Approvals
- Compliant with EN50155 And EN45545-2 Railway Standards
Our factory trained engineering support team are ready to assist with product selection and technical support on this range and our other rail application specific products, please call for further information.