The E35SE series of isolated 150W 1/8 brick dc/dc converters are available in an open frame or enclosed potted case offers a 9-60V input range with single voltage outputs of 5, 12, 24 and 48 v in an industry standard footprint.

These versatile units are designed for many applications, industrial and transportation requirements offering compliance to both EN50155 and EN45545-2. The output voltage can be trimmed with a range of -20% to +20%. They offer efficiencies of over 92%.

With an operating temp range from -40 to +105°C these units are also ideal for use in rugged applications where normally you might find mil grade units being used such as battery chargers, jammers and communications equipment.

Features

  • Efficiency up to 92.2%
  • Fully protected: Input UVLO, Output OVP, OCP and OTP
  • Available in open frame or fully potted casing
  • Wide output voltage trim range ( +/- 20%)
  • No minimum load required
  • Operating Baseplate Temperature: -40°C to +105°C
  • Up to 4242Vdc isolation
  • Working altitude up to 5500 m
  • IEC/EN/UL/CSA 60950-1,62368-1
  • Compliant to EN50155 & EN45545-2

Our product specialists are on hand to assist with product selection and guide you through the design cycle. We can offer technical and commercial support and arrange for samples. Datasheets are downloadable below, please contact us for more information.

Model Information

Part NumberV In ( VDC)V Out ( VDC)I Out (A)Power (W)Package
E35SE05030PDPG9 to 605301501/8 brick
E35SE12013PDPG9 to 6012131501/8 brick
E35SE24006PDPG9 to 602461501/8 brick
E35SE48003PDPG9 to 604831501/8 brick