A UPS, or Uninterruptible Power Supply system, is a critical component in various settings to provide backup power when the primary power source fails or experiences fluctuations. Here are some benefits of using a UPS system in your application. Protection against Power Cuts: The primary purpose of a UPS is to provide a temporary [...]
P-DUKE has announced another ultra-wide input voltage range DC/DC converter, the RED40U, to its selection of DC/DC converters with a 12:1 input voltage range. This DC/DC converter series provides high performance and reliability for any railway/ rolling stock and industrial application. The compact 2"x1" industrial standard package delivers up to 40W output power and [...]
P-DUKE has launched the new MCF series which are front-end filters which are designed to complement P-DUKE COTS (commercial-off-the-shelf) DC/DC converters. This enables them to comply with the requirements of MIL-STD 1275D (Characteristic of 28-volt DC electrical systems in military vehicles) and MIL-STD 461 (Requirement for the control of electromagnetic interference characteristics of subsystems [...]
This White Paper was originally released by P-Duke in August 2022 Download PDF version What to look for in a DC/DC converter for Railway Applications Railway electrification systems rely on a steady DC supply to both power their DC motors and the control/energy circuits. These DC-traction systems are more [...]
This article was originally published by P-Duke on 5 May, read in full below or download a pdf version Download PDF Copy A new approach to power stage design for EN50155 compliance regarding supply interruption and change-over. An article by Antonio Hsieh, Field Application Engineer at P-DUKE This article discusses [...]
AEG Power Solutions, has announced the new generation of its 10 to 20 kVA transformer-less UPS series with the launch of Protect 1 LCD, the enhanced generation of its Protect 1 former series. With no compromise to reliability, the system features the highest versatility of use in its category thanks to its unique flexibility of [...]
The RCD20U is a EN50155 DC/DC converter series that provides high performance and high reliability for railway and industrial applications. It comes in a compact 1"x1" industrial standard package and delivers up to 20W output power. These converters feature an 8:1 or 12:1 ultra-wide input voltage range of 9-75VDC and 14-160VDC which simplify the [...]
The RHM20W series are high performance 20W EN50155 DC/DC converters with 3000VAC reinforced isolation and 4.5 mm clearance/ creeping distances for safety critical application. This next generation of board mountable DC/DC converters has been designed especially for the demanding, ruggedized railway and industrial applications. This 20W EN50155 DC/DC converter series offer single and dual [...]
The RCD30W series is a 30W high-performance DC/DC converter designed for ruggedized railway and industrial applications. It expands upon P-Duke’s railway converter range of 10W to 20W in their compact 1”x1” package. The series has 4:1 input voltage ranges of 9-36V, 18-75V, and 36-160V, which perfectly fits the supply voltages of rolling stock equipment. [...]
The RHKW/RHDW series from P-Duke are high performance EN51055 approved DC/DC converters with 3000VAC reinforced isolation with 4.5 mm clearance/ creeping distances for safety critical applications. This next generation of board mountable DC/DC converters has been designed especially for the demanding, ruggedized railway and other such industrial applications where harsh conditions are typical. The [...]