About Andy Eden

This author has not yet filled in any details.
So far Andy Eden has created 87 blog entries.

PowerGridM – Stackable Backplane System adds flexibility to Mil Grade Designs

The PowergridM Plug & Play modular BackPlane UPS Stacking System Supports the Integration and Stacking of VAC UPS, Battery Expansion, AC to DC Power Supplies and VDC UPS Pluggable Power Modules Into a Single Integrated Power Management System (IPMS). To provide a highly flexible and robust method for establishing an intelligent and integrated power management [...]

By |2019-09-11T14:48:15+00:00September 11th, 2019|AJ's Power Source, Press release|

Meet Luso at Medtech Ireland at Galway Racecourse this September

Visit Luso at the Medtech Ireland Exhibition this 25/26 September at Galway Racecourse. We are on booth 55 where we will be showcasing our wide range of power supplies from our globe spanning array of franchise partners.  Our product specialists will be on hand to assist and recommend solutions for your power requirements. We will [...]

By |2019-09-04T14:41:15+00:00September 4th, 2019|Press release, Uncategorized|

New Medical Power Catalogue from Advanced Energy ( Excelsys)

Advanced Energy’s (was Excelsys) low voltage configurable modular power supplies can deliver 25% longer lifetimes than competitor products. Our fanless and fan-cooled products provide efficiencies of up to 94%. Our low voltage products carry full international safety certifications that meet IEC60601-1 (third edition) and IEC60601-1-2 (fourth edition EMC) requirements. This ensures all our low [...]

By |2019-08-30T13:18:00+00:00August 30th, 2019|Excelsys Technologies, Press release|

Advantages to using Andon sockets with your sensor application

Introduction to Andon Sockets – what are their advantages and benefits Andon Electronics make precision sockets used in the testing and board-level assembly of image sensors, optoelectronic and gas sensors, DC-DC converters, batteries, crystal oscillators, fuses, relays, and more. These innovative and effective components are available exclusively in the UK from Luso Electronics. Leading [...]

By |2019-08-29T10:50:41+00:00August 29th, 2019|Andon, Press release|

Meet Luso at Sensors & Instrumentation Live this September

Visit Luso at the Sensors & Instrumentation Live NEC, 25-26 September on Stand 5 where we will be showcasing our wide range of power supplies from our globe spanning array of franchise partners.  Our product specialists will be on hand to assist and recommend solutions for your power requirements. We will have the latest [...]

By |2019-08-16T09:45:23+00:00August 16th, 2019|Press release|

Delta AC/DC PSU for lighting applications has all latest approvals

Delta Electronics’ latest series of open frame power supply, the PJL Series is specifically targeted for lighting applications. The series comprises two models both with 48V constant voltage in a 200W (PJL-48V200WBAA) or 400W (PJL-48V400WBAA) output power version. Complete with built-in active PFC the highly efficient fan cooled or convection cooled design has optimised [...]

By |2019-08-12T18:08:35+00:00August 12th, 2019|Delta, Press release|

EEMPL announce availability of 3D coils for Automotive Actuators

Actuators are now an essential part of electronic control systems in passenger cars and commercial vehicles. It is their job to convert the electrical signals from the control unit into an action. Most actuators are electric motors or electro-magnetic valves. They adjust flaps, for example, regulate the flow of fluids or actuate pumps to [...]

By |2019-08-07T16:56:04+00:00August 7th, 2019|Elec & Eltek, Press release|

Surge Suppression Modules Enable Simple RIA12 Compliance

The SSM series are surge protection modules. They operate by clamping input surge voltages to a certain level to protect DC/DC converters and also makes them keep working when an input surge occurs. They are designed for protecting DC/DC modules used for railway applications. Throughout Europe, electronic equipment in railway applications is governed by [...]

By |2019-07-31T14:15:34+00:00July 31st, 2019|P-Duke, Press release|

Configurable PSU ideal for Industrial Robotic and Instrumentation Applications

Efore's RCB600 is ideal for many industrial applications that require multiple voltage power inputs such as industrial robots or instrumentation. The RCB600 is a modular, configurable multi-output power solution offering unrivalled performance and flexibility. It is capable of delivering 600W from a 5 × 3” 1U package, and is one of the smallest commercially available [...]

By |2019-07-18T10:14:31+00:00July 18th, 2019|EFORE, Press release|

Application note explaining features on switchmode power supplies

Introduction to features found on most switch mode power supplies. This application note provides an insight to the features that are provided on a power supply and the value that these features provide. Any system designer intending to use a power supply in their application should be aware of the features that are provided [...]

By |2019-07-10T10:21:48+00:00July 10th, 2019|Blog|